user_mobilelogo

The world's first of the A1.5 power amplifier took place during last weekend's Hong Kong show!

The setup consisted of two working prototypes paired with Wilson Audio Alexx speakers in one of the large rooms of the Convention Center. The result was spectacular, the entire Team hopes you enjoyed it.

Full production in November 2018, stay tuned!

The entire Team is very happy to announce that the first I1 integrated amplifiers have left our assembly place at the end of last week!

Please do not hesitate to contact your local dealer for a demo.

In order to be able to use the new CH Link HD cable, a new input connector was needed into the C1 digital input HD board. But this is not only a matter of connector...

Together with the support of the new CH Link HD cable, the onboard chipset was upgraded to the latest available components. This ensures the most accurate transmission inside the C1 controller, whatever the stream's sampling frequency and format is.

A few years after the introduction of the CH Link cable for transmission of the digital stream between D1 drive and C1 D/A controller, a new cable is introduced that replaces the original link. The CH Link HD is based on the latest generation of high-speed backplane connectors and impedance-controlled cable.

In combination with the new D1 digital output HD board and C1 digital input HD board, the end result is dramatically improved.

Eight years after the launch of the D1 SACD/CD player, the processors technology & performances have evolved and it was time to offer our customers an upgrade for their current player.

Thanks to the latest available chipsets, this new digital output HD board offers better cable drivers but also new perspective in term of features thanks to the use of powerful processor.

A brand new connector for our proprietary link is introduced with this board, and the associated C1 digital input HD board and CH Link HD cables are also available for owners of D1/C1 combo.

All D1 can be upgraded with this new HD board, a simple board exchange from the backpanel and a firmware upgrade are needed.