T1 Firmware Version 1.10

1.10

• Stability: resolved an issue that prevented GPS locking in certain situations.

1.9

• Background firmware update: adds support for background firmware updates, which are triggered by the CH-Control application. To use this feature, the device needs to have a USB key attached - use the provided one. It is highly recommended to keep the USB key permanently attached to ensure that the device can receive automatic firmware updates in the future.
• Stability: address a potential GPS functionality interruption that may occur after prolonged device operation.

1.8

• Add possibility to take network commands without fully participate to CH network protocol.
• Various network enhancements and fixes.

1.7

• Fix GPS module detection
  When using the option 'Always on' for the setting "GPS power" there could be a faulty detection of the GPS module during a subsequent T1 power on. This leads to a change of the "Tracker source" from "GPS" to "Reference In", which remains as long as the user don't set it back (if possible).
• Improve managing of the new display panels.

1.5/1.6

• Add support for new display panels.
• Network enhancements.
• Change potentially upsetting terms in menus.